Pni ASIC Manual de usuario descargar pdf (Pagina 10)

PNIASIC

HostProcessorInterface

Figure 5: SPI Port Full Timing Sequence (cpol = 0 )

Figure 6: SPI Port Timing Parameters (cpol = 0)

SPI Port Usage Tips

A SPI port can be implemented using different clock polarity options. The clock polarity used with the PNI ASIC

must be normally low, (cpol = 0).

Figure 6 graphically shows the timing sequence (cpol = 0). Data is always

considered valid while the SCLK is high (t

DASH

= Time, Data After SCLK High). When SCLK is low, the data is in

transition (t

DBSH

= Time, Data Before SCLK High).

When implementing a SPI port, whether it is a dedicated hardware peripheral port, or a software implemented port

using general purpose I/O (also known as Bit-Banging) the timing parameters given in

Figure 6 must be met to

ensure reliable communications. The clock set-up and hold times, t

DBSH

and t

DASH

must be greater than 100 nS.

PNICorporation133AviationBlvd.,Suite101,SantaRosa,CA95403‐1084USA;,Fax:(707)566‐2261

Forthemostcurrentspecifications,pleasevisitourwebsiteat:www.pnicorp.com



‐10‐

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sin comentarios

Pni ASIC Manual de usuario Pagina 10